PHC Hydraulic Cone Crusher,stone crusher,rock crusher

HP Series high efficiency Hydraulic Cone Crusher is a world-level cone crusher developed from the up-to-the-minute technology of Germany. The cone crusher not only improves the production capacity and crushes efficiently, but also widens the applying area, the hardness of materials range from limestone to basalt. It has a second-to-none crushing performance in the work of medium-size crushing, fine crushing and super fine crushing. The crusher is the improved type of spring cone crusher and can be used to replace ordinary hydraulic cone crusher in the line of mining and construction. It is the most ideal equipment for large stone crushing factory and mining industry.

Character and technical advantages:

HP Series high efficiency Hydraulic Cone Crusher has a better performance compared with spring cone crusher and ordinary Hydraulic Cone Crusher:

1. A high crushing ratio and production efficiency.
the connection of higher turning speed and stroke makes the rated power and passing capacity improved greatly and the crushing ratio and capacity increased.

2. Less spare part consuming and low operation cost.
advanced crushing principle and technical data, reliable operation and low operation cost. All parts of the crusher have anti-wearing protection, which can make the life time of spare parts increased by 30% and the maintenance costs decreased to the lowest. The crusher avoids the disadvantages of impact crusher like low average crushing ratio, large energy consumption, fast abrasion of hammer, impact plate and lining board.

3. between-layer pressuring crushing and better finished product shape.
The crusher adopts between-layer pressuring crushing principal and the suited turning speed, not the traditional single particle crushing principal. The special crushing cavity can makes the crusher crush materials selectively, thus the proportion of fine product and products of cubic shape be increased distinctly and products of lump size decreased by a large extent.

4. Hydraulic protection and hydraulic cavity clearing, high automatization and less stop production and repairing time.
the discharge opening adjusted by hydraulic and overload protection makes performance of the crusher increased by a large extent, the maintenance and operation easier, the repairing time shorter.; the bidirectional metal releasing hydraulic vat makes slab pass through crushing cavitythe crusher can discharges materials automatically when the hydraulic works under the conditions of iron passing and instantaneous overloading, thus there is no trouble of stopping the crusher to discharge materials by hand.

5. Thin oil lubrication makes the life time increased.
Unique design of thin oil lubrication system prolongs life time of the crusher, high performance and not touchable labyrinth airproof part blocks off the dust and remove the common disorders like the mixture of oil and water in spring cone crusher.

6. Manifold crushing cavity.
It is only need to change fixed cone lining board and movable cone lining board; the type of crushing cavity can be changed from standard coarse cavity to short head fine cavity, which can meet various kinds of need.

7. Easy maintenance and operation.
all parts of HP cone crusher can be assembled, disassembled and repaired from the top and side part, including the fixed cone and movable cone. For the changing no need to disassemble the crusher body and fasten the bolts. Hydraulic motor makes the performance of crusher better.

8. The crusher can provide customers a higher capacity, better product shape, and an easy operation.

Common problems for Hydraulic cone crusher:
The performance of ordinary hydraulic cone crusher can act as the reference for the performance of HP series cone crusher. As a composing unit of the production line, its performance can be influenced by other units like feeder, belt conveyor, vibrating screen, motor, transmission part and hopper, etc.
Take care of the following factors which can influence the performance of hydraulic cone crusher:

choose the right crushing cavity according to the materials be crushed;
the feeding size should be right;
materials distributed equally around the round of crushing cavity;
automatically control system;
discharge opening of cone crusher works normally;
the model of belt conveyor be seasoned with the max. processing ability of the crusher;
choose the right screen model for advance screening and closed screening

Rock Crusher(PE400*600)

Every feature of rock crusher has been carefully designed to provide superior quality and performance. Rock crusher is widely used for crushing various materials like stone, granite, trap rock, coke, coal, manganese ore, iron ore, emery, fused aluminum, oxide, fused calcium carbide, lime stone, quartzite, alloys, etc.
Rock crusher is recommended by leading consultants in this field and is used by hundreds of customers all over the world.

Rock crusher main features:
High reduction ratio.
Simple structure
Easy maintenance.

Jaw Crusher, Stone Crusher,Stone Breaker

Stone Crusher

Crusher Series: Jaw crusher, Impact crusher, Combined crusher, Fineness Crusher, Sand maker, Cone crusher.

PE jaw crusher features of greater breaking ratio, uniform particle sizes, rational construction, reliable operation, and easy maintenance and cost-effective. Hence, this type of equipment has been extensively used in many areas such as building material, mining, chemical, and metallurgical and water conservancy industries. This equipment is preferable to be selected as the facilities for primarily crushing various materials with breaking strength up to 320 MPa.

PF impact crusher is capable of crushing the minerals and rocks with breaking strength up to 320 MPa, featuring with greater processing capability and finer discharging particles. The crushed products are in rectangular shape with low flakes and no internal cracks. Hence, this type of equipment is preferable to be selected as the facilities for crushing excellent stone materials used for highways and in the areas of water conservancy, airport and civil construction of high-rise buildings.

PC combined crusher is used in areas of cement, building materials and mining industries for the materials with breaking strength no greater than 200 Mpa. The size of the feeding material may be up to 450-1000 mm and the average size at the discharge is around 5-8 mm.

PCX Super-Fineness Energy-Saving Crushers can save: 40% power consumption reduced at equivalent output; it can guarantee the fineness of 85% of the particles at the discharge is controlled within 3mm;

PCX Super-Fineness Energy-Saving Crushers can save 40% power consumption reduced at equivalent output; and can guarantee the fineness of 85% of the particles at the discharge is controlled within 3mm;

New type of high quality alloy material with multiple V-Mo elements has made both ends of the tips detachable for use with ultra-long service life more than 4 times of the original life; the rear cover of the upper machine box may be hydraulically (hand)-operated for replacing of the parts so as to facilitate maintenance.

Hammer Crusher ,Hammer Mill ,Coal Crusher

Application of Hammer crusher:
The hammer crusher also named hammer mill, which is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc. The PC-Hammer crusher is suitable for both dry and wet crushing of brittle, medium-hard materials for the mining,coal, metallurgic, construction material, road building, and chemical industries. the maximum, compressive resistance of the crushed materials can be up 150Mpa. it crushes by the collisions between high-speed hammer and materials, has features of simple structure, high reduction ration, high efficiency, etc.
Feature of Hammer Crusher:
It is of various types;
It is suitable for crushing maximum, medium and minimum stones;
It is easy to be operated;
Usage range of our hammer crusher:
Our hammer crusher (hammer mill) series products are applicable for various hard and fragile materials, such as limestone, coal, salt, gypsum, alum, brick and tile, etc. the crushing compressive strength of materials should not be in excess of 150Mpa. The hammer crusher is mainly used in such industries as cement, coal separation, electricity generation, building materials and compound fertilizer, etc. The hammer crusher can crush materials with different sizes into equal particle, which favors the next procedure. The hammer crusher has the advantages of reliable mechanical structure, high productivity and favorable applicability.

Cone Crusher & Gyratory Crusher Application

Cone Crusher & Gyratory Crusher Application
The cone crushers is widely applied in metallurgical, construction, road building, chemical and phosphatic industry. Cone crusher is suitable for hard and mid-hard rocks and ores, such as iron ores, copper ores, limestone, quartz,granite, gritstone, etc. Type of the crushing cavity is decided by the application of the ores. Standard type is for PYZ (secondary crush); middle type is for PYD (tertiary crush); short-head type is for primary and secondary crush.
Cone Crusher & Gyratory Crusher Features
1. High productivity; high quality;
2. Less machine stop time;
3. Easy maintenance and low cost;
4. Unique crushing ability in primary, secondary and tertiary crushing.
Cone Crusher Structure & Operation Principles
The cone crusher or gyratory crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjustingdischarge opening. During operation, the motor drives the eccentric shaft shell to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wallis close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.

Impact Crusher

Impact Crusher is mainly used to crush many kinds of large, medium, small materials whose side length is less than 500mm, and compression resistance should not be more than 350Mpa. The impact crusher is widely used in hydroelectricity, highway, artificial stone and sand, building material, etc.
Characteristics of Impact Crusher:
Special structure, connected without key, high chrome hammer, unique impact liner, deal with hard material, high efficiency and save energy, cubic shape of product, adjustable output size.

Impact Crusher Operating principle:
This impact crushes materials with impact force. When the materials enter the blow bar area, they are crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush. Then the materials will be shot back to the blow bar again for the third crush. This process repeats until the materials are crushed to the required size and discharged from the lower part of the machine. The size and shape of the finished powder can be changed by adjusting the gap between the impact rack and rotor support. The machine employs self-weigh security device in its back frame. When other objects enter the impact cavity, they will be forced out of the machine by the impact rack in the front and back of the machine.

Characteristics of Impact Crusher:
Excellent cubic final products
Special structure
Non-key connection
High chrome hammer
Durability in long time simplicity in operation
Easy adjustment, high reduction ration
Good performance and high reliability

Pe Jaw Crusher

Application
The crusher can be used to crush ores and rocks whose grain size is smaller than 340mm. It can be widely used in small and medium mine, building material, highway engineering, silicate and chemical industry. It can crush the materials whose compressive strength is less than 320MPa.

Working Principle:
The electric motor transmits power through belt, drives the moving jaw plate do periodic movement to the fixed jaw plate surround the eccentric shaft. The angle between toggle plate and moving jaw plate enlarges when the moving jaw plate moves up. So the moving jaw plate is closes to the fixed jaw plate. The stuff will be crushed in this process. The angle between toggle plate and moving jaw plate decreases when the moving jaw plate moves down. The moving jaw plate moves away from fixed jaw plate by the pulling of rod and spring. The products such as stone after be crushed will be discharged from the outlet.